تحميل

Product compositions

A Product Composition describes what an approved product design is intended to contain. It belongs to one Product Release and identifies its components or materials, positions, quantities, units, and calculation basis. It is the design composition, rather than the history of the actual components installed in a particular manufactured item.

Use Component Use for actual component batches, serialized components, installation, and replacement. Use Product Packs for commercial packaging and contained selling quantities. A carton containing six finished products is a pack; it does not make those products components of one manufactured assembly.

When to create one

Create a composition when you need to maintain an intended bill of components or materials for a release, or when the selected passport requirement needs that information. A product with an empty composition register can still have an approved release and manufacturing records. Passport readiness evaluates the selected profile's requirements; it does not require a composition merely because this register exists.

Product Composition is Actualog's way to store intended design information. It is not a statutory entity name or a universal prerequisite for catalog export. Actual component provenance is recorded separately because the intended design and what was actually installed may need to be compared.

Example

A rechargeable battery assembly design contains twelve cells of an approved cell release and a specified housing material. Its composition describes those intended sources and quantities. When a real assembly is produced, Component Use can identify the cell batch or exact cells actually installed. Replacing a cell later changes the actual installation history, while preserving the original approved design.

Create the intended composition

  1. Select the company and open Logistic → Definitions → Product Composition.
  2. Search the existing compositions before selecting Create new composition.
  3. Choose the exact draft Product Release and enter its Calculation Basis when relevant.
  4. Select Create new composition to create the composition header.
  5. In Composition entries, select Add row for each component or material.
  6. For a component, choose its released Component Product Release. For a material represented by a supplier code, provide Material Scheme and Material Code instead.
  7. Record Position, positive Quantity, and Measure Unit, then select Save in the entries panel.
  8. Review the composition with its parent Product Release. Selecting Release for that release approves the attached composition too.

The current row editor exposes component release or material scheme/code, position, quantity, and unit. The structured composition record can carry additional evidence and proportion information; do not assume a field has been entered merely because the data model supports it.

Who maintains it

A Product Editor, Product Governance Manager, or Company Administrator with product-data authority prepares composition information while the parent release is Draft. Release approval belongs to the Product Governance Manager or Company Administrator with release-approval authority. There is no separate composition approval decision in the current form.

Key rules and blockers

A release has one intended composition. The parent release must still be a draft to edit its composition or entries. Component releases must exist and be released. Every entry needs an identifiable source, a positive quantity, and a known unit. A product cannot contain itself, directly or through a component cycle.

Where proportions are supplied in structured data, their calculation basis must be explicit. Fractions on one basis cannot total more than one. A mass fraction and a count ratio are different calculations; never combine them into an unexplained percentage.

Once the parent release is approved, preserve its composition. For a design change, prepare a new Product Release and its composition. If saving fails, check the parent release state, component approval, source selection, quantities, units, cycles, and whether another user changed the draft.

A demonstration can use a new Draft release designated Demo B and clearly marked sample material rows. Its rows describe the test scenario and provide no manufacturing or certification evidence. Existing released revisions cannot acquire a new composition retrospectively; this would change what had already been approved.